Pricing of public utilities and government policy

Pricing of public utilities and government policy

Priority to public

There are a number of principles which govern the pricing of public utility Services. There are public utilities like Education, sewage, roads, etc. which may be supplied free to the public and their costs should be covered through general Taxation. Dalton calls it the general taxation principle. Such services are pure public goods whose benefits cannot be priced because they are indivisible.

It is not possible to identify the individual beneficiaries and charge them for the services. In some cases, the beneficiaries may be identified but they cannot be charged for their use. For instance, the users of a bridge (flyover) over the railway line can be identified, but it may be inconvenient to the taxing authority to collect the road tax and for the road users to pay the tax due for the time involved.

The best course is to finance the flyover out of general taxation. J.F. Due has mentioned the following four rules where public services should be provided free and their costs covered from general taxation.

Firstly, in the case of such services where little waste will occur if they are provided free. Second, where charging a price will restrict the use of the service. Third, where the cost of collecting taxes is high.  Fourth, where the pattern of distribution of tax burden on services is inequitable.

These rules are applicable to a few essential public services like education, sewage, roads, etc. But in the case of services other than those included under “pure public goods,” free services might lead to wastage of Resources.

The general principle for pricing such public services is to recover costs without distorting the allocation of resources. This is done by making selling price equal to short-run marginal costs while keeping productive capacity constant. But water and power systems periodically require large investments. In such cases, Average costs fall as production is increased and the actual price charged is below the average cost.

 

Marginal Cost Pricing Rule

 

One of the aims of PSEs is to be economically efficient or to maximise social welfare. If a PSE has a monopoly in the production of a good or service, it will not be economically efficient because it produces where MC=MR. However, for more efficient resource allocation, it is essential to find out whether the PSE is operating under decreasing or increasing returns.

If price equals MC under decreasing returns, the PSE will earn profits and if it is operating under increasing returns, the PSE will incur losses. Thus the application of the marginal cost pricing rule to PSEs has implications for the financial position of the enterprise.

No-Profit No-Loss Policy

Economists like Lewis, Coase, Durbin, Henderson, and little advocate no-profit no-loss policy or the principle of break-even for PSEs. Their contention is that PSEs are meant to serve public interest and not to make profits.

According to Lewis, the price policy of PSEs should be such that they should make neither a loss nor a profit after meeting all capital charges. He further states that what the economists principle supports is not the MC pricing but a system of charging what the traffic will bear’ so that consumers contribute to fixed costs according to their capacity to pay.

Lewis supports this policy on the ground that it prevents over-expansion and under-expansion of PSEs and avoids inflationary and deflationary tendencies. Other economists opine that PSEs should pay their way taking one year with another. They should fix such a price for their products or services so as to break-even over a period of years, making neither losses nor profits.

The no-profit no-loss policy means that the prices of PSE products or services should cover total costs. Total costs include all types of expenses incurred by a PSE in producing a product. They are short-period and long-period fixed and variable costs of production, current and replacement costs, depreciation charges, interest on capital employed, and advertisement, selling and distribution expenses.

Profit-Price Policy

In developing countries like India where PSEs are required to play a dominant role in Economic Development, PSEs follow the profit-price policy. The profit-price policy was first put forward in India by Dr. V.K.R.V. Rao in June, 1959. In a Note to the AICC Seminar on Planning held at Ooty, he categorically rejected the theory of no-profit no-loss for PSEs and argued for the adoption of profit-price policy.

Such a policy would make the state utilise its own resources rather than taxing its citizens. According to him, PSEs must be carried on a profit making basis not only in the sense that the public enterprises must yield an economic price but also get for the community sufficient resources for financing a part of Investment and maintenance expenditure of the government. This involves a profit-price policy in regard to PSEs.

The theory of no-profit no-loss in PSEs is particularly inconsistent with a socialist economy and if followed in a Mixed Economy like India, it will hamper its development. In support of his view, Prof. Rao quoted the example of the erstwhile USSR. In the USSR, PSEs made a double contribution to development finance: reinvestment of profits for their own expansion and contribution to the state budget.

 

 ,

Public utilities are essential services that are provided to the public by private companies or the government. They include services such as electricity, water, gas, and telecommunications. The pricing of public utilities is a complex issue that is affected by a number of factors, including the cost of providing the service, the demand for the service, and government policy.

There are a number of different pricing methods that can be used for public utilities. Cost-based pricing is a method in which the price of the service is based on the cost of providing the service. This method is often used for essential services that are considered to be a public good. Marginal cost pricing is a method in which the price of the service is based on the marginal cost of providing the service. This method is often used for services that have a high fixed cost and a low marginal cost. Ramsey pricing is a method in which the price of the service is set to maximize social welfare. This method takes into account the demand for the service and the cost of providing the service. Peak-load pricing is a method in which the price of the service is higher during peak demand periods and lower during off-peak demand periods. This method is used to encourage consumers to use the service during off-peak periods. Two-part tariffs are a method in which the price of the service is divided into a fixed charge and a variable charge. The fixed charge covers the fixed cost of providing the service, and the variable charge covers the marginal cost of providing the service. Universal service is a policy that ensures that all consumers have access to essential services, regardless of their income or location.

Government policy can have a significant impact on the pricing of public utilities. Regulation is a government policy that sets limits on the prices that public utilities can charge. Privatization is a government policy that involves the sale of public utilities to private companies. Deregulation is a government policy that reduces or eliminates regulation of public utilities. Competition is a market condition in which there are multiple suppliers of a good or service. Subsidies are payments that the government makes to public utilities to reduce the price of the service. Taxes are payments that consumers and businesses make to the government. Environmental policy is a government policy that aims to protect the Environment. Social policy is a government policy that aims to improve the well-being of Society. Consumer protection is a government policy that aims to protect consumers from unfair or deceptive practices.

The pricing of public utilities is a complex issue that is affected by a number of factors, including the cost of providing the service, the demand for the service, and government policy. There are a number of different pricing methods that can be used for public utilities, and the best method to use will vary depending on the specific circumstances. Government policy can also have a significant impact on the pricing of public utilities.

What is a public utility?

A public utility is a business that provides a service that is essential to the public, such as electricity, water, or gas. Public utilities are often regulated by the government to ensure that they provide a safe and reliable service at a fair price.

What are the different types of public utilities?

There are many different types of public utilities, but some of the most common include:

  • Electric utilities: These companies provide electricity to homes and businesses.
  • Water utilities: These companies provide water to homes and businesses.
  • Gas utilities: These companies provide natural gas to homes and businesses.
  • Telecommunications utilities: These companies provide telephone, Internet, and cable television services.
  • Transportation utilities: These companies provide public transportation services, such as buses and trains.

What are the benefits of public utilities?

Public utilities provide a number of benefits to society, including:

  • They provide essential services that are necessary for everyday life.
  • They help to ensure that everyone has access to these services, regardless of their income or location.
  • They can help to promote economic development by providing businesses with the resources they need to operate.
  • They can help to protect the environment by reducing pollution and conserving resources.

What are the drawbacks of public utilities?

Public utilities also have some drawbacks, including:

  • They can be expensive to operate and maintain.
  • They can be subject to government regulation, which can make it difficult to innovate and keep costs down.
  • They can be monopolies, which means that they have a lot of power over the prices they charge and the services they provide.
  • They can be inefficient, which can lead to higher prices and lower quality service.

What is the role of government in regulating public utilities?

The government plays a number of roles in regulating public utilities, including:

  • Setting prices: The government can set prices for public utilities to ensure that they are fair and reasonable.
  • Ensuring quality: The government can set standards for the quality of service that public utilities must provide.
  • Protecting consumers: The government can protect consumers from unfair or deceptive practices by public utilities.
  • Promoting competition: The government can promote competition among public utilities to keep prices down and service quality high.

What are some of the challenges facing public utilities?

Public utilities face a number of challenges, including:

  • Aging Infrastructure-2/”>INFRASTRUCTURE: Public utilities often have aging infrastructure that needs to be repaired or replaced.
  • Climate change: Climate Change is leading to more extreme weather events, which can damage public infrastructure and disrupt service.
  • Competition: Public utilities are facing increasing competition from private companies, which can put downward pressure on prices and make it difficult to maintain quality service.
  • Regulation: Public utilities are subject to a lot of government regulation, which can make it difficult to innovate and keep costs down.

What are some of the solutions to the challenges facing public utilities?

There are a number of solutions to the challenges facing public utilities, including:

  • Investing in infrastructure: Public utilities need to invest in their infrastructure to keep it in good condition and prevent outages.
  • Adapting to climate change: Public utilities need to adapt to climate change by building infrastructure that can withstand extreme weather events.
  • Promoting competition: Public utilities need to promote competition to keep prices down and service quality high.
  • Reducing regulation: Public utilities need to reduce regulation to make it easier to innovate and keep costs down.
  1. Which of the following is not a public utility?
    (A) Electricity
    (B) Water
    (C) Gas
    (D) Cable TV

  2. Which of the following is the most common type of pricing for public utilities?
    (A) Cost-based pricing
    (B) Rate-of-return regulation
    (C) Marginal cost pricing
    (D) Deregulation

  3. Which of the following is the goal of cost-based pricing?
    (A) To ensure that utilities recover their costs
    (B) To provide a fair return on investment for utilities
    (C) To promote efficiency in the use of resources
    (D) To protect consumers from high prices

  4. Which of the following is a criticism of cost-based pricing?
    (A) It can lead to high prices for consumers.
    (B) It can discourage efficiency in the use of resources.
    (C) It can provide utilities with a monopoly power.
    (D) All of the above.

  5. Which of the following is the goal of rate-of-return regulation?
    (A) To ensure that utilities recover their costs
    (B) To provide a fair return on investment for utilities
    (C) To promote efficiency in the use of resources
    (D) To protect consumers from high prices

  6. Which of the following is a criticism of rate-of-return regulation?
    (A) It can lead to high prices for consumers.
    (B) It can discourage efficiency in the use of resources.
    (C) It can provide utilities with a monopoly power.
    (D) All of the above.

  7. Which of the following is the goal of marginal cost pricing?
    (A) To ensure that utilities recover their costs
    (B) To provide a fair return on investment for utilities
    (C) To promote efficiency in the use of resources
    (D) To protect consumers from high prices

  8. Which of the following is a criticism of marginal cost pricing?
    (A) It can lead to low prices for consumers.
    (B) It can discourage investment in new infrastructure.
    (C) It can lead to financial instability for utilities.
    (D) All of the above.

  9. Which of the following is the goal of deregulation?
    (A) To promote competition in the utility Industry
    (B) To reduce prices for consumers
    (C) To improve efficiency in the use of resources
    (D) All of the above.

  10. Which of the following is a criticism of deregulation?
    (A) It can lead to higher prices for consumers.
    (B) It can reduce quality of service.
    (C) It can lead to financial instability for utilities.
    (D) All of the above.