<<–2/”>a >strong>Energy Efficiency
Energy efficiency, means using less energy to provide the same level of energy. It is therefore one method to reduce human greenhouse gas emissions. For example if a house is insulated, less energy is used in heating and cooling to achieve a satisfactory temperature. Another example is installing fluorescent lights or skylights, instead of incandescent lights, to attain the same level of illumination.
Efficient energy use is achieved primarily by means of a more efficient technology or process. Energy efficient buildings, industrial processes and transportation could reduce the world’s energy needs in 2050 by one third, and help controlling global emissions of greenhouse gases. Making homes, vehicles, and businesses more energy efficient is seen as a largely untapped solution to addressing Global Warming, Energy Security, and fossil fuel depletion. The 1973 oil crisis, where oil prices were very high, focussed attention on energy efficiency.
Energy-efficient appliances
Refrigerators, freezers, ovens, stoves, dishwashers, and clothes washers and dryers, can be designed to reduce the amount of electricity they use. Modern energy efficient refrigerators, for example, use 40 percent less energy than those of 2001. Power management systems also reduce energy usage by idle appliances by turning them off or putting them into a ‘low-energy mode’ after a certain time. Many countries identify energy-efficient appliances using an Energy Star or energy efficiency labels.
Energy-efficient building design
The location and surroundings of buildings can help in regulating internal temperature and illumination. For example, trees, landscaping, and hills can provide shade and block wind. In cooler climates, designing buildings with an east-west orientation to increase the number of south-facing windows minimizes energy use, by maximizing passive solar heating. Energy-efficient, well located windows, well-sealed doors, and thermal insulation of walls, basement slabs, and foundations can reduce heat loss by 25 to 50 percent.
When it comes to energy saving, energy management is the process of monitoring, controlling, and conserving energy in a building or organization. Typically this involves the following steps:
- Metering your energy consumption and collecting the data.
- Finding opportunities to save energy, and estimating how much energy each opportunity could save. You would typically analyze your meter data to find and quantify routine energy waste, and you might also investigate the energy Savings that you could make by replacing equipment (e.g. lighting) or by upgrading your building’s insulation.
- Taking action to target the opportunities to save energy (i.e. tackling the routine waste and replacing or upgrading the inefficient equipment). Typically you’d start with the best opportunities first.
- Tracking your progress by analyzing your meter data to see how well your energy-saving efforts have worked.
Energy management is the key to saving energy in your organization. Much of the importance of energy saving stems from the global need to save energy – this global need affects energy prices, emissions targets, and legislation, all of which lead to several compelling reasons why you should save energy at your organization specifically.
Organizational integration in energy
Many organizations use a siloed approach toward energy management. One department manages contracts. Another may work toward reducing usage, while another is tasked with accomplishing sustainability goals. There is no cohesive strategy for buying, managing and monitoring energy. That’s what integrated energy management is all about—having a unified view of your organization’s energy and a plan for using it as efficiently as possible. It’s using a holistic approach to address all aspects of energy usage, from purchasing electricity to measuring the return on Investment (ROI) of RENEWABLE ENERGY projects.
Integrated energy management is more than a buzzword. It’s a long-term approach that requires buy-in from key stakeholders, thoughtful planning and tapping into the expertise of professionals who have the ability to put your plans into action.
Energy Management in Operational Functions
Energy is an integral part of today‟s modern life. It has become the blood of our day to day life. But it is not free. It comes at a monetary price but more than that it comes at Environment cost too. It is very difficult to think about our modern life without energy. But the generation of energy requires natural Resources which are depleting day by day. On the other side, use of energy is increasing exponentially. In developing nation like India, about 49% of total commercial energy is consumed in industries and utilities like Compressed Air, Air Conditioning, Steam, Hot water, Electrical systems, fuel, water system consumes substantial part of total energy in these industries.
The judicious and effective use of energy to maximize profits (that is, minimize costs) and enhance competitive positions is energy management. Therefore, any management activity that affects the use of energy falls under this definition. The primary objective of energy management is to maximize profit and minimize costs by optimizing energy procurement and utilization, throughout the organization to minimize energy costs without affecting production and quality and to minimize environmental effects.
There are many motivational forces for energy management presently acting on the Industrial Sector:
Competitiveness
Although energy cost may constitute a relatively small part of total operating cost, for many industries, it is one of the most manageable resources among labor and material. Reductions in energy consumption and thereby reducing energy cost are very vital for any Industry to remain competitive.
Short Falls in power supplies
Due to limitations in power supply infrastructures, many industries face power supply problems in terms of reliability and quality of the power supply and increasing energy demand and industrialization have led to predictions of a serious supply shortfall.
Environmental Management Systems
In certain parts of the world, especially in Europe, ISO 14001 standard on environmental management is increasingly becoming a requirement for trade. Energy management is an important component of environmental management and waste reduction strategies, and features significantly in ISO14001.
Global Climate Change
The global climate is changing because of human activity, and that one of the major causes of Climate Change is the emission of Greenhouse Gases (GHG), principally CO2, into the Atmosphere from the combustion of fossil fuels. Since fossil fuels, directly or indirectly, are important energy sources to industry, there is international pressure to reduce GHG emissions by reducing energy consumption.
A Power Purchase Agreement (PPA) secures the payment stream for a Build-Own Transfer (BOT) or concession project for an independent power plant (IPP). It is between the purchaser “offtaker” (often a state-owned electricity utility) and a privately owned power producer. The PPA outlined here is not appropriate for electricity sold on the world spot markets . This summary is focused on a base load thermal plant (the issues would differ slightly for mid-range or peaking thermal or hydro Plants).
- Where a government agency enters into an arrangement for a private power company to establish a power plant and sell on the power to the government agency, the public agency typically enters into a PPA.
- The PPA usually takes the place of a BOT or concession agreement: in addition to obligations relating to the sale and purchase of the power generated, the PPA also sets out the required design and outputs and operation and maintenance specifications for the power plant.
- Sale of capacity and energy – the power producer agrees to make available to the Purchaser the contracted capacity of energy and deliver the energy in accordance with the PPA.
- Charges for Available Capacity and Electrical Output – the charging mechanism in the PPA is generally a pass through arrangement: the price charged for the power will consist of a charge (availability charge) to cover the project company’s fixed costs (including a return on Equity for the project company) plus a variable charge to cover the project company’s variable costs. The availability charge relates to the availability of the power plant and the variable charge is calculated according to the quantity of power supplied. The purchaser will want a guaranteed long-term output from the project and so the availability charge is typically the minimum that it will be paid, provided that the plant can be shown to make sure power available.
Energy production planning and control
Over the last decades, the production planning process of factories had to take more and more additional production factors into consideration. In the past, production factors like work force, machine capacity and material were focused on meeting the main production goals, namely time, cost and quality . Due to the changes in the energy market, the resource energy has developed steadily from an unlimited resource to an indispensable production factor.
The production planning and control of a factory is usually supported by computer-based systems. These systems ensure an effective and efficient production process by the use of their planning tasks with a strong focus on dates, capacities and quantities. In addition to the planning tasks, the systems are responsible for data storage, handling and Communication throughout the computer-based systems and subsystems of the factory’s operations . Within the field of manufacturing, the following computer-based systems can be distinguished.
- Supply Chain Management Systems (SCM)
- Enterprise Resource Planning Systems (ERP)
- Manufacturing Execution Systems (MES)
- Production Data Acquisition (PDA)
As engineering and maintenance managers are aware, all building systems and components need some level of maintenance, and renewable-energy systems are no exception to this rule. The specific maintenance requirements vary based on the type of system and components installed.
For all renewable-energy systems, it is proper maintenance practice to inspect the Integrity of mechanical and electrical connections at least once each year. Corroded or loose connections can result in decreased performance, and in extreme cases, they can create safety hazards.
Solar hot-water systems require periodic inspection of the panels for leaks, damage, and even build-up of dirt on panel surfaces. If the systems use a water-glycol mixture, technicians should test the system periodically for proper concentrations of glycol. They should inspect and test drain-down systems before the onset of cold weather to ensure the panels drain fully.
Solar electric systems also require periodic inspection of the panels for physical damage, dirt build-up, and proper tightness of the electrical connections. Technicians also should make certain vegetation growing near the installation does not block sunlight to the panels. Shadows that fall on even part of one panel can cause a significant reduction in the system’s total output. Solar electric systems also require that technicians periodically test the output from system inverters.
Wind-turbine systems require similar testing and inspection of electrical connections and inverters.Technicians also should inspect all of the system’s moving parts, including turbine blades and bearings, for damage at least once each year, according to manufacturer recommendations.
Geothermal systems have relatively low maintenance requirements, compared with other renewable-energy systems. Most geothermal systems use a water-source heat pump, in which the system circulates water through a loop buried in the ground. The maintenance requirements parallel those for other heat-pump systems, with the exception of the buried loop. As long as workers install the system properly and nothing disturbs the ground in the area of the underground piping, no additional maintenance requirements should exist.,
Energy efficiency is the reduction of energy consumption through more efficient use of energy. Energy efficiency can be achieved through improved technology, such as more efficient appliances and lighting, or through behavioral changes, such as turning off lights when leaving a room.
Energy conservation is the reduction of energy consumption through a variety of means, including improved efficiency, behavioral changes, and changes in the way energy is produced and delivered. Energy conservation can help to reduce greenhouse gas emissions, improve air quality, and save Money.
Renewable energy is energy that comes from natural sources or processes that are constantly replenished. Renewable energy sources include solar, wind, hydropower, geothermal, and Biomass/”>Biomass. Renewable energy can help to reduce our reliance on fossil fuels and protect the environment.
Energy efficiency standards are regulations that set minimum energy efficiency requirements for products such as appliances, lighting, and vehicles. Energy efficiency standards can help to reduce energy consumption and save money.
Energy audits are assessments of a building or facility to identify opportunities for energy efficiency improvements. Energy audits can help to reduce energy costs and improve the comfort and productivity of a building or facility.
Energy labeling is a system of providing information about the energy efficiency of products to consumers. Energy labels can help consumers to make informed choices about the energy efficiency of the products they purchase.
Energy tax credits are tax breaks that are available to businesses and individuals who invest in energy efficiency improvements. Energy tax credits can help to make energy efficiency more affordable and encourage investment in energy efficiency technologies.
Energy-efficient buildings are buildings that are designed and constructed to use less energy than traditional buildings. Energy-efficient buildings can save money on energy costs, improve indoor air quality, and reduce greenhouse gas emissions.
Energy-efficient appliances are appliances that use less energy than traditional appliances. Energy-efficient appliances can save money on energy costs and reduce greenhouse gas emissions.
Energy-efficient lighting is lighting that uses less energy than traditional lighting. Energy-efficient lighting can save money on energy costs and reduce greenhouse gas emissions.
Energy-efficient vehicles are vehicles that use less energy than traditional vehicles. Energy-efficient vehicles can save money on fuel costs and reduce greenhouse gas emissions.
Energy-efficient transportation is transportation that uses less energy than traditional transportation. Energy-efficient transportation can save money on fuel costs and reduce greenhouse gas emissions.
Energy-efficient homes are homes that are designed and constructed to use less energy than traditional homes. Energy-efficient homes can save money on energy costs, improve indoor air quality, and reduce greenhouse gas emissions.
Energy-efficient communities are communities that are designed and developed to use less energy than traditional communities. Energy-efficient communities can save money on energy costs, improve air quality, and reduce greenhouse gas emissions.
Energy-efficient cities are cities that are designed and developed to use less energy than traditional cities. Energy-efficient cities can save money on energy costs, improve air quality, and reduce greenhouse gas emissions.
Energy-efficient countries are countries that are designed and developed to use less energy than traditional countries. Energy-efficient countries can save money on energy costs, improve air quality, and reduce greenhouse gas emissions.
Energy efficiency is important for a number of reasons. First, it can help to reduce our reliance on fossil fuels. Fossil fuels are a finite resource, and their use contributes to climate change. Energy efficiency can help us to use these resources more wisely and to reduce our impact on the environment.
Second, energy efficiency can save us money. By using less energy, we can lower our energy bills and save money on our monthly expenses. This can be especially helpful for families and businesses that are struggling to make ends meet.
Third, energy efficiency can improve our Quality Of Life. By making our homes and businesses more energy-efficient, we can create a more comfortable and healthy environment for ourselves and our families. We can also reduce our exposure to pollutants and improve our air quality.
Fourth, energy efficiency can create jobs. The energy efficiency industry is a growing sector of the economy, and it is creating new jobs in a variety of fields. These jobs are often well-paying and offer good benefits.
Fifth, energy efficiency can help to protect the environment. By reducing our energy consumption, we can lower our emissions of greenhouse gases and other pollutants. This can help to mitigate climate change and improve air quality.
In conclusion, energy efficiency is important for a number of reasons. It can help to reduce our reliance on fossil fuels, save us money, improve our quality of life, create jobs, and protect the environment. We should all make an effort to improve the energy efficiency of our homes, businesses, and communities.
What is energy efficiency?
Energy efficiency is the use of less energy to provide the same level of service. It can be achieved through a variety of measures, such as using more efficient appliances, improving insulation, and using renewable energy sources.
What are the benefits of energy efficiency?
There are many benefits to energy efficiency, including:
- Reduced energy bills: Energy-efficient appliances and practices can save you money on your energy bills.
- Reduced emissions: Using less energy helps to reduce greenhouse gas emissions and Air Pollution.
- Increased comfort: Energy-efficient homes and buildings are more comfortable to live in.
- Improved Health: Improved air quality can lead to improved health.
- Increased resilience: Energy-efficient homes and businesses are more resilient to power outages.
How can I improve my energy efficiency?
There are many ways to improve your energy efficiency, including:
- Use energy-efficient appliances: Energy-efficient appliances use less energy than older models.
- Improve insulation: Proper insulation can help to keep your home or business cooler in the summer and warmer in the winter.
- Use renewable energy sources: Renewable energy sources, such as solar and wind power, can help you to reduce your reliance on fossil fuels.
- Unplug electronics when you’re not using them: Even when they’re turned off, many electronics continue to draw power. Unplugging them when you’re not using them can help to save energy.
- Turn down the thermostat: In the winter, turning down the thermostat by just 2 degrees can save you up to 10% on your heating bill.
- Wash clothes in cold water: Most of the energy used to wash clothes goes to heating the water. Washing your clothes in cold water can save you a significant amount of energy.
- Air-dry your clothes: Instead of using the dryer, hang your clothes outside to dry. This will save you energy and money.
- Seal air leaks: Air leaks around windows and doors can let in hot or cold air, making your HVAC system work harder. Sealing air leaks can help to improve your energy efficiency.
- Weatherize your home: Weatherizing your home can help to keep it cooler in the summer and warmer in the winter. This can save you money on your energy bills.
- Install a programmable thermostat: A programmable thermostat can help you to save energy by automatically adjusting the temperature of your home when you’re asleep or away.
- Use energy-efficient Light bulbs: Energy-efficient light bulbs use less energy than traditional incandescent bulbs.
- Switch to LED lights: LED lights are the most energy-efficient type of light bulb. They use up to 80% less energy than traditional incandescent bulbs and last up to 25 times longer.
- Use motion sensors: Motion sensors can turn on lights when you enter a room and turn them off when you leave. This can help to save energy.
- Use natural light: When possible, open the curtains or blinds to let in natural light. This can help to reduce your reliance on artificial light.
- Plant trees: Trees can help to shade your home in the summer and block the wind in the winter. This can help to improve your energy efficiency.
What are the challenges of energy efficiency?
One of the biggest challenges of energy efficiency is the upfront cost of energy-efficient appliances and practices. However, the long-term savings on energy bills can offset the initial cost.
Another challenge is the lack of awareness about energy efficiency. Many people are not aware of the benefits of energy efficiency or how to improve their energy efficiency.
Finally, some people may be resistant to change. They may be comfortable with their current energy habits and not want to make changes.
What are the future trends in energy efficiency?
The future of energy efficiency is bright. The cost of energy-efficient appliances and practices is decreasing, and the awareness of energy efficiency is increasing. As a result, we can expect to see even more people making energy-efficient choices in the future.
Sure, here are some MCQs without mentioning the topic Energy Efficiency:
Which of the following is not a renewable energy source?
(A) Solar Energy
(B) Wind Energy
(C) Nuclear Energy
(D) Hydroelectric energyWhich of the following is the most efficient way to heat water?
(A) Electric water heater
(B) Gas water heater
(C) Solar water heater
(D) Tankless water heaterWhich of the following is the most efficient way to cool a home?
(A) Central air conditioning
(B) Window air conditioning
(C) Heat pump
(D) FanWhich of the following is the most efficient way to light a home?
(A) Incandescent light bulb
(B) CFL light bulb
(C) LED light bulb
(D) Halogen light bulbWhich of the following is the most efficient way to drive a car?
(A) Hybrid car
(B) Electric car
(C) Diesel car
(D) Gasoline carWhich of the following is the most efficient way to cook food?
(A) Electric stove
(B) Gas stove
(C) Microwave oven
(D) OvenWhich of the following is the most efficient way to wash clothes?
(A) Front-loading washing machine
(B) Top-loading washing machine
(C) Clothesline
(D) DryerWhich of the following is the most efficient way to dry clothes?
(A) Clothesline
(B) Clothes dryer
(C) Dehumidifier
(D) Air conditionerWhich of the following is the most efficient way to cool a computer?
(A) Laptop computer
(B) Desktop computer
(C) Tablet computer
(D) SmartphoneWhich of the following is the most efficient way to print documents?
(A) Laser printer
(B) Inkjet printer
(C) Dot-matrix printer
(D) Thermal printer
I hope these MCQs are helpful!