Transformers

91. Spacers are provided between adjacent coils

to provide free passage to the cooling oil
to insulate the coils from each other
both (A) and (B)
none of the above

Join Our Telegram Channel
Subscribe on YouTube
adjacent coils" class="read-more button" href="https://exam.pscnotes.com/mcq/spacers-are-provided-between-adjacent-coils/#more-47489">Detailed SolutionSpacers are provided between adjacent coils

92. During short circuit test iron losses are negligible because

the current on secondary side is negligible
the voltage on secondary side does not vary
the voltage applied on primary side is low

Detailed SolutionDuring short circuit test iron losses are negligible because

93. Which of the following insulating materials can withstand the highest temperature safely?

Cellulose
Asbestos
Mica
Glass fibre

Detailed SolutionWhich

Join Our Telegram Channel
47.8C117.2 448 288 448 288 448s170.8 0 213.4-11.5c23.5-6.3 42-24.2 48.3-47.8 11.4-42.9 11.4-132.3 11.4-132.3s0-89.4-11.4-132.3zm-317.5 213.5V175.2l142.7 81.2-142.7 81.2z"/> Subscribe on YouTube
of the following insulating materials can withstand the highest temperature safely?

94. If the supply frequency to the transformer is increased, the iron loss will

not change
decrease
increase
any of the above

Join Our Telegram Channel
Subscribe on YouTube
the iron loss will" class="read-more button" href="https://exam.pscnotes.com/mcq/if-the-supply-frequency-to-the-transformer-is-increased-the-iron-loss-will/#more-47180">Detailed SolutionIf the supply frequency to the transformer is increased, the iron loss will

95. In a power or distribution transformer about 10 per cent end turns are heavily insulated

to withstand the high voltage drop due to line surge produced by the shunting capacitance of the end turns
none of the above

Detailed SolutionIn a power or distribution transformer about 10 per cent end turns are heavily insulated

96. Iron loss of a transformer can be measured by

low power factor wattmeter
unity power factor wattmeter
frequency meter
any type of wattmeter

Join Our Telegram Channel
Subscribe on YouTube
measured by" class="read-more button" href="https://exam.pscnotes.com/mcq/iron-loss-of-a-transformer-can-be-measured-by/#more-47085">Detailed SolutionIron loss of a transformer can be measured by

97. Negative voltage regulation is indicative that the load is

capacitive only
inductive only
inductive or resistive
none of the above

Join Our Telegram Channel
Subscribe on YouTube
the load is" class="read-more button" href="https://exam.pscnotes.com/mcq/negative-voltage-regulation-is-indicative-that-the-load-is/#more-47072">Detailed SolutionNegative voltage regulation is indicative that the load is

98. Losses which occur in rotating electric machines and do not occur in trans formers are

friction and windage losses
magnetic losses
hysteresis and eddy current losses
copper losses

Join Our Telegram Channel
Subscribe on YouTube
not occur in trans formers are" class="read-more button" href="https://exam.pscnotes.com/mcq/losses-which-occur-in-rotating-electric-machines-and-do-not-occur-in-trans-formers-are/#more-46712">Detailed SolutionLosses which occur in rotating electric machines and do not occur in trans formers are

99. The no load current in a transformer lags behind the applied voltage by an angle of about

180°
120°
90°
75°

Join Our Telegram Channel
Subscribe on YouTube
about" class="read-more button" href="https://exam.pscnotes.com/mcq/the-no-load-current-in-a-transformer-lags-behind-the-applied-voltage-by-an-angle-of-about/#more-46488">Detailed SolutionThe no load current in a transformer lags behind the applied voltage by an angle of about

100. During open circuit test of a transformer

primary is supplied rated voltage
primary is supplied full-load current
primary is supplied current at reduced voltage

Detailed SolutionDuring open circuit test of a transformer

Page 1Page 2Page 3Page 4Page 5
Test 1Test 2Test 3