Signal processing

1. Consider a six-point decimation-in-time Fast Fourier Transform (FFT) algorithm, for which the signal-flow graph corresponding to X[I] is shown in the figure. Let $${W_6} = \exp \left( { – \frac{{j2\pi }}{6}} \right).$$ In the figure, what should be the values of the coefficients a1, a2, a3 in terms of W6 so that X[I] is obtained correctly?

$${a_1} = 1,{a_2} = W_6^2,{a_3} = {W_6}$$
$${a_1} = - 1,{a_2} = W_6^2,{a_3} = {W_6}$$
$${a_1} = - 1,{a_2} = {W_6},{a_3} = W_6^2$$
$${a_1} = 1,{a_2} = {W_6},{a_3} = W_6^2$$

Join Our Telegram Channel
Subscribe on YouTube
which the signal-flow graph corresponding to X[I] is shown in the figure. Let $${W_6} = \exp \left( { – \frac{{j2\pi }}{6}} \right).$$ In the figure, what should be the values of the coefficients a1, a2, a3 in terms of W6 so that X[I] is obtained correctly?" class="read-more button" href="https://exam.pscnotes.com/mcq/consider-a-six-point-decimation-in-time-fast-fourier-transform-fft-algorithm-for-which-the-signal-flow-graph-corresponding-to-xi-is-shown-in-the-figure-let-w_6-exp-left-fracj2/#more-44538">Detailed SolutionConsider a six-point decimation-in-time Fast Fourier Transform (FFT) algorithm, for which the signal-flow graph corresponding to X[I] is shown in the figure. Let $${W_6} = \exp \left( { – \frac{{j2\pi }}{6}} \right).$$ In the figure, what should be the values of the coefficients a1, a2, a3 in terms of W6 so that X[I] is obtained correctly?

2. An FIR system is described by the system function $$H\left( z \right) = 1 + \frac{7}{2}{z^{ – 1}} + \frac{3}{z}{z^{ – 2}}$$ The system is

Maximum phase
Minimum phase
Mixed phase
Zero phase

Subscribe on YouTube

button" href="https://exam.pscnotes.com/mcq/an-fir-system-is-described-by-the-system-function-hleft-z-right-1-frac72z-1-frac3zz-2-the-system-is/#more-44534">Detailed
Join Our Telegram Channel
SolutionAn FIR system is described by the system function $$H\left( z \right) = 1 + \frac{7}{2}{z^{ – 1}} + \frac{3}{z}{z^{ – 2}}$$ The system is

3. Given that $$L\left[ {f\left( t \right)} \right] = {{s + 2} \over {{s^2} + 1}},L\left[ {g\left( t \right)} \right] = {{{s^2} + 1} \over {\left( {s + 3} \right)\left( {s + 2} \right)}},$$ $$h\left( t \right) = \int\limits_0^t {f\left( \tau \right)} g\left( {t – \tau } \right)d\tau $$ L[h(t)] is

$${{{s^2} + 1} over {s + 3}}$$
$${1 over {s + 3}}$$
$${{{s^2} + 1} over {left( {s + 3} ight)left( {s + 2} ight)}} + {{s + 2} over {{s^2} + 1}}$$
None of the above

Detailed SolutionGiven that $$L\left[ {f\left( t \right)} \right] = {{s + 2} \over {{s^2} + 1}},L\left[ {g\left( t \right)} \right] = {{{s^2} + 1} \over {\left(

Join Our Telegram Channel
24.9-48.3 48.6-11.4 42.9-11.4 132.3-11.4 132.3s0 89.4 11.4 132.3c6.3 23.7 24.8 41.5 48.3 47.8C117.2 448 288 448 288 448s170.8 0 213.4-11.5c23.5-6.3 42-24.2 48.3-47.8 11.4-42.9 11.4-132.3 11.4-132.3s0-89.4-11.4-132.3zm-317.5 213.5V175.2l142.7 81.2-142.7 81.2z"/> Subscribe on YouTube
{s + 3} \right)\left( {s + 2} \right)}},$$ $$h\left( t \right) = \int\limits_0^t {f\left( \tau \right)} g\left( {t – \tau } \right)d\tau $$ L[h(t)] is

4. A 1.0 kHz signal is flat-top sampled at the rate of 1800 samples/sec and the samples are applied to an ideal rectangular LPF with cut-off frequency of 1100 Hz, then the output of the filter contains

Only 800 Hz component
800 Hz and 900 Hz components
800 Hz and 1000 Hz components
800 Hz, 900 Hz and 1000 Hz components

Join Our Telegram Channel
Subscribe on YouTube
of 1800 samples/sec and the samples are applied to an ideal rectangular LPF with cut-off frequency of 1100 Hz, then the output of the filter contains" class="read-more button" href="https://exam.pscnotes.com/mcq/a-1-0-khz-signal-is-flat-top-sampled-at-the-rate-of-1800-samples-sec-and-the-samples-are-applied-to-an-ideal-rectangular-lpf-with-cut-off-frequency-of-1100-hz-then-the-output-of-the-filter-contains/#more-44311">Detailed SolutionA 1.0 kHz signal is flat-top sampled at the rate of 1800 samples/sec and the samples are applied to an ideal rectangular LPF with cut-off frequency of 1100 Hz, then the output of the filter contains

5. The input x(t) and the output y(t) of a continuous- time system are related as $$y\left( t \right) = \int\limits_{t – T}^t {x\left( u \right)du} $$ The system is

Linear and time-variant
Linear and time-invariant
Non-linear and time-variant
Non-linear and time-invariant

Join Our Telegram Channel
Subscribe on YouTube
class="read-more button" href="https://exam.pscnotes.com/mcq/the-input-xt-and-the-output-yt-of-a-continuous-time-system-are-related-as-yleft-t-right-intlimits_t-tt-xleft-u-rightdu-the-system-is/#more-44130">Detailed SolutionThe input x(t) and the output y(t) of a continuous- time system are related as $$y\left( t \right) = \int\limits_{t – T}^t {x\left( u \right)du} $$ The system is

6. The input to a channel is a bandpass signal. It is obtained by linearly modulating a sinusoidal carrier with a single-tone signal. The output of the channel due to this input is given by $$y\left( t \right) = \left( {{1 \over {100}}} \right)\cos \left( {100t – {{10}^{ – 6}}} \right)\cos \left( {{{10}^6}t – 1.56} \right)$$ The group delay (tg) and the phase delay (tp) in seconds, of the channel are

tg = 10-6, tp = 1.56
tg = 1.56, tp = 10-6
tg = 10-8, tp = 1.56 × 10-6
tg = 108, tp = 1.56

Join Our Telegram Channel
Subscribe on YouTube
(tg) and the phase delay (tp) in seconds, of the channel are" class="read-more button" href="https://exam.pscnotes.com/mcq/the-input-to-a-channel-is-a-bandpass-signal-it-is-obtained-by-linearly-modulating-a-sinusoidal-carrier-with-a-single-tone-signal-the-output-of-the-channel-due-to-this-input-is-given-by-yleft-t/#more-43872">Detailed SolutionThe input to a channel is a bandpass signal. It is obtained by linearly modulating a sinusoidal carrier with a single-tone signal. The output of the channel due to this input is given by $$y\left( t \right) = \left( {{1 \over {100}}} \right)\cos \left( {100t – {{10}^{ – 6}}} \right)\cos \left( {{{10}^6}t – 1.56} \right)$$ The group delay (tg) and the phase delay (tp) in seconds, of the channel are

7. The z-transform F(z) of the function f(nT) = anT is

$${z over {z - {a^T}}}$$
$${z over {z + {a^T}}}$$
$${z over {z - {a^{ - T}}}}$$
$${z over {z + {a^{ - T}}}}$$

Join Our Telegram Channel

of the function f(nT) = anT is" class="read-more button"
Subscribe on YouTube
href="https://exam.pscnotes.com/mcq/the-z-transform-fz-of-the-function-fnt-ant-is/#more-43673">Detailed SolutionThe z-transform F(z) of the function f(nT) = anT is

8. The response of an initially relaxed linear constant parameter network to a unit impulse applied at t = 0 is 4e-2tu(t). The response of this network to a unit step function will be

”2[1
u(t)” option2=”4[e-t – e-2t]u(t)” option3=”sin2t” option4=”(1 – 4e-4t)u(t)” correct=”option1″]

Detailed SolutionThe response of an initially relaxed linear constant parameter network to a unit impulse applied at

Join Our Telegram Channel
target="_blank" class="youtube-subscribe-button"> Subscribe on YouTube
t = 0 is 4e-2tu(t). The response of this network to a unit step function will be

9. A network consisting of a finite number of linear resistor (R), inducer (L), and capacitor (C) elements, connected all in series or all in parallel, is excited with a source of the form $$\sum\limits_{k = 1}^3 {{a_x}\,\cos \left( {k{\omega _0}t} \right),{\rm{were}}\,{a_k} \ne 0,} \,{\omega _0} \ne 0.$$ The source has nonzero impedance. Which one of the following is a possible form of the output measured across a resistor in the network?

$$sumlimits_{k = 1}^3 {{b_x},cos left( {k{omega _0}t + {phi _k}} ight),{ m{were}},{b_k} e {a_k},} , orall K$$
$$sumlimits_{k = 1}^3 {{b_x},cos left( {k{omega _0}t + {phi _k}} ight),{ m{were}},{b_k} e 0,} , orall K$$
$$sumlimits_{k = 1}^3 {{a_x},cos left( {k{omega _0}t + {phi _k}} ight)} $$
$$sumlimits_{k = 1}^2 {{a_x},cos left( {k{omega _0}t + {phi _k}} ight)} $$

Join Our Telegram Channel

the following is a possible form of the output measured across
Subscribe on YouTube
a resistor in the network?" class="read-more button" href="https://exam.pscnotes.com/mcq/a-network-consisting-of-a-finite-number-of-linear-resistor-r-inducer-l-and-capacitor-c-elements-connected-all-in-series-or-all-in-parallel-is-excited-with-a-source-of-the-form-sumlimit/#more-43359">Detailed SolutionA network consisting of a finite number of linear resistor (R), inducer (L), and capacitor (C) elements, connected all in series or all in parallel, is excited with a source of the form $$\sum\limits_{k = 1}^3 {{a_x}\,\cos \left( {k{\omega _0}t} \right),{\rm{were}}\,{a_k} \ne 0,} \,{\omega _0} \ne 0.$$ The source has nonzero impedance. Which one of the following is a possible form of the output measured across a resistor in the network?

10. The Fourier Transform of a function x(t) is X(f). The Fourier transform of $${{dx\left( t \right)} \over {dt}}$$ will be

$${{dxleft( t ight)} over {dt}}$$
$$j2pi fXleft( f ight)$$
$$jfXleft( f ight)$$
$${{Xleft( f ight)} over {jf}}$$

Join Our Telegram Channel
Subscribe on YouTube
button" href="https://exam.pscnotes.com/mcq/the-fourier-transform-of-a-function-xt-is-xf-the-fourier-transform-of-dxleft-t-right-over-dt-will-be/#more-43305">Detailed SolutionThe Fourier Transform of a function x(t) is X(f). The Fourier transform of $${{dx\left( t \right)} \over {dt}}$$ will be

Page 1Page 2Page 3Page 4Page 5
Test 1Test 2Test 3