Thermal power program of India
More than 65% of India’s electricity generation capacity comes from thermal power Plants, with 85% of the country’s thermal power generation being coal-based. The ten biggest thermal power stations operating in India are all coal-fired, with five of them owned and operated by state-run National Thermal Power Corporation (NTPC).
Vindhyachal Thermal Power Station, Madhya Pradesh
The Vindhyachal Thermal Power Station in the Singrauli district of Madhya Pradesh, with an installed capacity of 4,760MW, is currently the biggest thermal power plant in India. It is a coal-based power plant owned and operated by NTPC. Construction of the plant, which comprised 12 generating units (six 210MW units and six 500MW units), had begun in 1982. The first unit was commissioned in 1987 while the sixth 500MW was commissioned in April 2013. An additional 500MW unit was commissioned in August 2015, increasing the plant’s gross capacity from 4,260MW to 4,760MW.
Mundra Thermal Power Station, Gujarat
The 4,620MW Mundra Thermal Power Station located in the Kutch district of Gujarat is currently the second biggest operating thermal power plant in India. It is a coal-fired power plant owned and operated by Adani Power.
The power plant consists of nine generating units (four 330MW units and five 660MW units). The first 330MW unit was commissioned in May 2009 and the last 660MW unit of the plant commissioned in March 2012. The coal used for the power plant is mainly imported from Indonesia. The plant’s water source is the seawater from the Gulf of Kutch.
Sasan Ultra Mega Power Plant, Madhya Pradesh
The Sasan Ultra Mega power plant, located in the Sasan village of the Singrauli district, Madhya Pradesh, has an installed capacity of 3,960MW. Owned and operated by Reliance Power, it is one of India’s biggest power plants integrated with a coal mine. The coal-fired power plant includes six 660MW units and was fully commissioned in April 2015. It utilises coal from the Moher and Moher-Amlohri coal mines and draws water from Govind Vallabh Pant Sagar reservoir for its operations. It supplies reliable and low-cost power to approximately 420 million people across seven states.
Tiroda Thermal Power Plant, Maharashtra
The Tiroda thermal power plant is a 3,300MW coal-based power generation plant in Maharashtra, India. Owned and operated by Adani Power Maharashtra, the power plant consists of five 660MW units. The first unit of the power plant was commissioned in August 2012, while the last unit commenced operations in October 2014. The power plant uses state-of-the-art supercritical technology and draws water from the Wainganga River for its operations.
Talcher Super Thermal Power Station, Odisha
The Talcher Super Thermal Power Station or NTPC Talcher Kaniha, located in the Angul district of Odisha, is a 3,000MW coal-fired power plant owned and operated by NTPC. NTPC Talcher Kaniha plant consists of six 500MW units. The first unit of the plant was commissioned in February 1995 and the last unit began operations in February 2005. Turbine manufacturers for the plant were ABB and BHEL.
Rihand Thermal Power Station, Uttar Pradesh
Rihand Thermal Power Station is located at Rihandnagar, Sonebhadra district, Uttar Pradesh. Owned and operated by NTPC, the coal-fired power plant has an installed capacity of 3,000MW. The plant consists of six units generating 500MW each. The first unit was commissioned in March 1988 while the sixth unit was commissioned in October 2013.
Coal for the Rihand thermal power station is sourced from Amlori, Amloric expansion, and the Dudhichua mines in Madhya Pradesh. Water is sourced from the Rihand Reservoir built on Son River. The plant supplies electricity to various states in the northern part of India, including Uttar Pradesh, Rajasthan, Delhi, Punjab, Haryana, Himachal Pradesh, Jammu & Kashmir, and Chandigarh.
Sipat Thermal Power Plant, Chhattisgarh
The 2,980MW Sipat Super Thermal Power Plant in Sipat, Bilaspur district, Chhattisgarh, ranks as the eighth-largest thermal power station in India. It is a coal-based power plant owned and operated by NTPC. The power plant built in two stages is installed with six generating units (three 660MW supercritical units and three 500MW units). The first unit of the plant commenced commercial operations in August 2008, while the last unit was commissioned in June 2012.
NTPC Dadri, Uttar Pradesh
NTPC Dadri or National Capital Power Station (NCPS) owned and operated by NTPC is located in the Gautam Budh Nagar district of Uttar Pradesh, about 48km from the Indian capital New Delhi. The power station, with an installed capacity of 2637MW (1820MW- coal based and 817MW gas based), ranks as the sixth largest thermal plant in India. The power station consists of six coal-fired units (four 210MW units and two 490MW units) and six gas-based generating units (four 130.19MW gas turbines and two 154.51MW steam turbines). The first coal-fired unit was commissioned in October 1991 and the last unit was commissioned in July 2010. The gas-based generating units were commissioned between 1992 and 1997.
Hydroelectric programme in india
Hydropower is a RENEWABLE ENERGY resource because it uses the Earth’s water cycle to generate electricity. Water evaporates from the Earth’s surface, forms clouds, precipitates back to earth, and flows toward the ocean. The movement of water as it flows downstream creates kinetic energy that can be converted into electricity. 2700 TWH is generated every year. Hydropower supplies at least 50% of electricity production in 66 countries and at least 90% in 24 countries. Out of the total power generation installed capacity in India of 1,76,990 MW (June, 2011), Hydro Power contributes about 21.5% i.e. 38,106 MW. A capacity addition of 78,700 MW is envisaged from different conventional sources during 2007-2012 (the 11th Plan), which includes 15,627 MW from large hydro projects. In addition to this, a capacity addition of 1400 MW was envisaged from small hydro up to 25 MW station capacity. The total hydroelectric power potential in the country is assessed at about 150,000 MW, equivalent to 84,000 MW at 60% load factor. The potential of small hydro power projects is estimated at about 15,000 MW.
A hydroelectric power plant consists of a high dam that is built across a large river to create a reservoir, and a station where the process of energy conversion to electricity takes place. The first step in the generation of energy in a hydropower plant is the collection of run-off of seasonal rain and snow in lakes, streams and rivers, during the Hydrological Cycle. The run-off flows to Dams downstream. The water falls through a dam, into the hydropower plant and turns a large wheel called a turbine. The turbine converts the energy of falling water into mechanical energy to drive the Generator After this process has taken place electricity is transferred to the communities through transmission lines and the water is released back into the lakes, streams or rivers. This is entirely not harmful, because no pollutants are added to the water while it flows through the hydropower plant.
,
The thermal power program of India is a major initiative to increase the country’s electricity generation capacity. The program includes the construction of new coal-fired power plants, as well as the modernization and expansion of existing plants. The program is expected to cost billions of dollars and will take several years to complete.
Coal-fired power plants are the most common type of power plant in India. They account for about 60% of the country’s electricity generation capacity. Coal-fired power plants are a major source of Air Pollution, including particulate matter, sulfur dioxide, and nitrogen oxides. These pollutants can cause respiratory problems, heart disease, and cancer.
The modernization and expansion of existing coal-fired power plants is expected to reduce emissions of air pollutants. However, the construction of new coal-fired power plants will increase emissions. The government of India has pledged to reduce the country’s reliance on coal, but it is unclear how this will be achieved.
The thermal power program of India has a number of environmental, social, and economic impacts. The construction of new coal-fired power plants can lead to deforestation, Water Pollution, and Soil contamination. The operation of coal-fired power plants can also contribute to Climate change.
The thermal power program of India has a significant impact on the lives of people living near coal-fired power plants. These people are often exposed to high levels of air pollution, which can cause Health problems. The construction of new coal-fired power plants can also displace people from their homes and land.
The thermal power program of India has a positive impact on the Indian economy. The construction of new coal-fired power plants creates jobs and stimulates economic Growth. However, the environmental and social costs of the program are significant.
The thermal power program of India is a controversial issue. Some people support the program because it will increase the country’s electricity generation capacity. Others oppose the program because of its environmental and social impacts. The future of the program is uncertain. The government of India has pledged to reduce the country’s reliance on coal, but it is unclear how this will be achieved.
The thermal power program of India is a complex issue with a number of different impacts. It is important to weigh the benefits and costs of the program before making a decision about whether or not to support it.
What is a thermal power plant?
A thermal power plant is a power plant that uses heat to generate electricity. The heat is usually produced by burning coal, oil, or natural gas. The steam produced by the burning fuel drives a turbine, which in turn drives a generator to produce electricity.
How does a thermal power plant work?
A thermal power plant works by burning a fuel, such as coal, oil, or natural gas, to produce heat. The heat is then used to boil water, which turns into steam. The steam is then used to drive a turbine, which in turn drives a generator to produce electricity.
What are the advantages of thermal power plants?
The advantages of thermal power plants include:
- They are relatively inexpensive to build and operate.
- They can be built in a variety of sizes, from small plants that can power a single community to large plants that can power entire cities.
- They are reliable and can operate 24 hours a day, 7 days a week.
What are the disadvantages of thermal power plants?
The disadvantages of thermal power plants include:
- They produce air pollution, which can cause respiratory problems and other health issues.
- They contribute to Climate Change by emitting greenhouse gases, such as carbon dioxide.
- They require a lot of water, which can be a problem in areas where water is scarce.
What are the alternatives to thermal power plants?
The alternatives to thermal power plants include:
- Renewable energy sources, such as solar and wind power, do not produce air pollution or greenhouse gases.
- Nuclear power plants are also a source of clean energy, but they produce radioactive waste that must be carefully disposed of.
- Hydroelectric power plants can be a source of clean energy, but they can also have a negative impact on the Environment, such as by disrupting fish Migration.
What is the future of thermal power plants?
The future of thermal power plants is uncertain. As the world becomes more concerned about climate change, there is a growing push to phase out coal-fired power plants. However, thermal power plants will likely continue to play a role in the world’s energy mix for many years to come.
Sure, here are some MCQs on the topics of thermal power, renewable energy, and Energy Efficiency:
-
Which of the following is not a type of thermal power plant?
(A) Coal-fired power plant
(B) Nuclear power plant
(C) Solar power plant
(D) Wind power plant -
Which of the following is the most common type of thermal power plant in India?
(A) Coal-fired power plant
(B) Nuclear power plant
(C) Solar power plant
(D) Wind power plant -
Which of the following is the main advantage of thermal power plants?
(A) They are very efficient at converting fuel into electricity.
(B) They are relatively inexpensive to build and operate.
(C) They can be located in remote areas where there is no other source of power.
(D) They can be used to generate large amounts of electricity. -
Which of the following is the main disadvantage of thermal power plants?
(A) They produce a lot of pollution.
(B) They are a major source of greenhouse gas emissions.
(C) They require a lot of water.
(D) All of the above. -
Which of the following is a renewable energy source?
(A) Coal
(B) Oil
(C) Natural gas
(D) Solar Energy -
Which of the following is a non-renewable energy source?
(A) Coal
(B) Oil
(C) Natural gas
(D) Solar energy -
Which of the following is the most common type of renewable energy source in India?
(A) Hydropower
(B) Solar energy
(C) Wind Energy
(D) Biomass/”>Biomass energy -
Which of the following is the main advantage of renewable energy sources?
(A) They do not produce pollution.
(B) They do not produce greenhouse gas emissions.
(C) They are a sustainable Source Of Energy.
(D) All of the above. -
Which of the following is the main disadvantage of renewable energy sources?
(A) They are not always available.
(B) They are often more expensive than non-renewable energy sources.
(C) They require a lot of land.
(D) All of the above. -
Which of the following is an energy efficiency measure?
(A) Insulate your home.
(B) Install energy-efficient appliances.
(C) Turn off lights when you leave a room.
(D) All of the above. -
Which of the following is the main advantage of energy efficiency measures?
(A) They can save you Money on your energy bills.
(B) They can reduce your carbon footprint.
(C) They can help to improve air quality.
(D) All of the above. -
Which of the following is the main disadvantage of energy efficiency measures?
(A) They can be expensive to implement.
(B) They can take time to see results.
(C) They can require changes to your lifestyle.
(D) All of the above.
I hope these MCQs were helpful!