Solid waste managment

Solid Waste Management; Types of Solid waste Management; Factors affecting Solid Waste Generation

Solid Waste Management

Solid waste management is basic public Services which every citizen should have access to, both for Health-and-hygiene/”>Health and Hygiene, and for ensuring a good quality of living. Sanitation here refers to toilet facilities, whereas solid waste management refers to the management collection and disposal of solid waste (as opposed to liquid waste).
The image of a city as being clean and free of waste, impacts its desirability for doing business by entrepreneurs and for future residents to live.
Municipalities in India are responsible for collection, sweeping, storage, transfer, treatment and final disposal of waste.
A study by NIUA (2015) reports that urban areas in India generate more than 100,000 MT of waste every day, with Mumbai contributing 7000 MT, and Bangalore, 5000 MT.
While the Ministry of Urban Development has mandated several management and handling rules for solid waste, most cities and towns are finding it difficult to comply with these rules, keep their streets clean, and safely dispose the waste.
An analysis of waste disposal in 22 of India’s cities by the Federation of Indian Chambers of Commerce and Industry (FICCI (2009)), as pointed by Sridhar and Kumar (2013), shows that 14 out of India’s 22 cities which were studied, sent more than 75 per cent of their waste to dumpsites, indicating a lack of adequate treatment and disposal facilities.
Mumbai sends 100 per cent of its waste to dumpsites, while Delhi dumps 94 per cent of its waste.

Solid waste management Methods

Centralised method:

This method involves collection of municipal waste from all over the local area and by means of landfilling, dump outside the city/nagar panchayat limits.
This process looks at door-to-door collection of solid waste by waste pickers who hand over to the collection team who then discard the collected waste in the landfill.
The waste pickers are employees of the Municipal Corporation or Nagar Panchayat. The collection team is generally contracted out by a tendering process.

De-centralized method:

This is a model seen in a few places like Suryapet in Andhra Pradesh and Bangalore in Karnataka. The waste is collected ward-wise and is segregated at source into bio-degradable and non-biodegradable.
The biodegradable waste is composted at a nearby facility by different methods of aerobic and anerobic composting.
The non-biodegradable waste is further categorised into paper, plastic, Metal and other waste and then further collected by recyclers for up-cycling or downcycling of products

Rules and regulations associated with SWM

Under the 74th Constitutional Amendment, Disposal and managemenf of Municipal Solid Waste is one of the 18 functional domains of the Municipal Corporations and Nagar Panchayats.
The various rules and regulations for solid waste management are:

The Bio-Medical Waste (Management And Handling) Rules, 1998
Municipal Solid Waste (Management And Handling) Rules 2000
The Plastic Waste (Management And Handling) Rules, 2011
E-Waste (Management And Handling) Rules, 2011

There are other court cases that find their importance in terms of Solid Waste Management in India:

Almitra Patel vs. Union of India
L Wadhera vs. Union of India.
Judgement of Karnataka High Court towards Mandatory Segregation at Source

Solid Waste Management – Major Issue for India

The Government of India had notified the Municipal Solid Waste (Management and Handling) Rules in 2000, thereby making it mandatory for all Urban Local Bodies in the country to engage in collection, segregation, secondary storage in covered bins, transportation in covered vehicles, processing through composting or waste-to-energy technologies and disposal of rejects in engineered/sanitary landfills.

Door to door collection coverage is scanty at best, and segregation at household level is a rarity.
Collection even from community bins is not regular. Collection efficiency is low.
Processing is limited to very small portion of the waste.
Dumping is done in land-fills without any regard for Environment and without following scientific methods of disposal. Such inadequate disposal practice lead to problems that will impair human and animal health and result in economic, environmental and biological losses.
Improper waste management causes public health and environmental hazards like Climate change, air and Water Pollution, Soil contamination, spreads odours and disease, and breeds vermin including flies, mosquitoes, rats, dogs and monkeys.
Even after 12 years, most cities have confined themselves to collection and transportation of solid waste. Processing and safe disposal are being attempted only in a few cases.
The CPCB report also reveals that only 68% of the MSW generated in the country is collected of which, 28% is treated by the municipal authorities. Thus, merely 19% of the total waste generated is currently treated. .

Some of the major issues concerning solid waste management are:

Absence of segregation of waste at source
Lack of funds for waste management at ULBs
Lack of technical expertise and appropriate institutional arrangement
Unwillingness of ULBs to introduce proper collection, segregation, transportation and treatment/ disposal systems
Indifference of citizens towards waste management due to lack of awareness
Lack of community participation towards waste management and hygienic conditions
Lack of sewage management plan.

Suggestion Made by Kasturirangan report For solutions of Solid Waste

The Kasturirangan report by PC highlights the need for an integrated approach:

Reduction and segregation of waste at source and also efficient utilization of various components of the waste.
Principle of Reduce, Reuse, Recover , Recycle and Remanufacture (5Rs) should be adopted
Motivate Resident Welfare Associations (RWA), CBO / NGO’s to take up work of community awareness and door to door collection
Integration of kabadiwalas and rag pickers into MSWM system
It emphasizes setting up centralised (for incineration, gasification, pyrolysis) or decentralised (for biomethanation, vermicomposting) waste processing facilities keeping in view the quantity and quality of waste generated and financial viability of the processing technology.
Set up Common Regional Sanitary Landfill Facility, to reduce the land requirement. Cities above a Population of one million should set-up their own landfill and permit all cities and towns within 50km periphery of the city to use the facility for disposal of their waste.

Internationally good example for Solid Waste Management:

For instance, Copenhagen recycles most of the waste it generates and lets only 3 per cent go to the landfill.
Japan: In Japan, Incineration has been the primary disposal route for waste due to lack of space for landfills – 74% of all waste produced in Japan is incinerated with just 2% sent to landfill.
Extending the idea of recycling, Kitgum town in Uganda traps used water from houses and utilises it to grow food in grey water gardens.

Different type of Waste

Municipal Solid Waste

Municipal solid waste (MSW) is generated from households, offices, hotels, shops, schools and other institutions.
The major components are food waste, paper, plastic, rags, metal and glass, although demolition and construction debris is often included in collected waste, as are small quantities of hazardous waste, such as electric Light bulbs, batteries, automotive parts and discarded medicines and chemicals.

Industrial Solid Waste

Industrial solid waste in Indian states, as elsewhere, encompasses a wide range of materials of varying environmental toxicity.
Typically this range would include paper, packaging materials, waste from Food Processing, oils, solvents, resins, paints and sludges, glass, ceramics, stones, metals, plastics, rubber, leather, wood, cloth, straw, abrasives, etc.
As with municipal solid waste, the absence of a regularly up-dated and systematic Database on industrial solid waste ensures that the exact rates of generation are largely unknown

Agricultural Waste and Residues

Expanding agricultural production has naturally resulted in increased quantities of Livestock waste, agricultural crop residues and agro-industrial by-products.

Hazardous Waste

With rapid development in agriculture, industry, commerce, hospital and health-care facilities, the Indian State is consuming significant quantities of toxic chemicals and producing a large amount of hazardous waste.
Currently, there are about 110000 types of toxic chemicals commercially available.
Each year, another 1 000 new chemicals are added to the market for industrial and other uses.
The availability of robust data on the generation of hazardous waste for Indian States is limited by the reliability of information on the quantities and types of hazardous waste produced at the country level.
This is due to a variety of reasons, including the lack of qualified personnel to undertake the necessary assessment, the reluctance of industries to provide process information (including waste arising data) and a poor appreciation of the extent to which generated waste is hazardous.
Where data is available, significant difficulties are encountered in seeking to draw international comparisons due to differences in Classification and definition of hazardous waste from country to country within in the region.
Most hazardous waste is the by-product of a broad spectrum of industrial, agricultural and manufacturing processes, nuclear establishments, hospitals and health-care facilities.
Primarily, high-volume generators of industrial hazardous waste are the chemical, petrochemical, petroleum, metals, wood treatment, pulp and paper, leather, textiles and energy production Plants (coal-fired and nuclear power plants and petroleum production plants).
Small- and medium-sized industries that generate hazardous waste include auto and equipment repair shops, electroplating and metal finishing shops, textile factories, hospital and health-care centres, dry cleaners and pesticide users.

Type-based classification Solid Waste

Classification of wastes based on types, i.e., physical, chemical, and biological characteristics of wastes, is as follows:

Garbage:

This refers to animal and vegetable wastes resulting from the handling, sale, and storage, preparation, cooking and serving of food.
Garbage comprising these wastes contains putrescible (rotting) organic matter, which produces an obnoxious odour and attracts rats and other vermin.
It, therefore, requires special attention in storage, handling and disposal.

Ashes and residues:

These are substances remaining from the burning of wood, coal, charcoal, coke and other combustible materials for cooking and heating in houses, institutions and small industrial establishments.
When produced in large quantities, as in power-generation plants and factories, these are classified as industrial wastes.
Ashes consist of fine powdery residue, cinders and clinker often mixed with small pieces of metal and glass. Since ashes and residues are almost entirely inorganic, they are valuable in landfills.

Bulky wastes:

These include large household appliances such as refrigerators, washing machines, furniture, crates, vehicle parts, tyres, wood, trees and branches.
Since these household wastes cannot be accommodated in normal storage containers, they require a special collection mechanism.

Street wastes:

These refer to wastes that are collected from streets, walkways, alleys, parks and vacant plots, and include paper, cardboard, plastics, dirt, leaves and other vegetable matter.
Littering in public places is indeed a widespread and acute problem in many countries including India, and a solid waste management system must address this menace appropriately.

Biodegradable and non-biodegradable wastes:

Biodegradable wastes mainly refer to substances consisting of organic matter such as leftover food, vegetable and fruit peels, paper, textile, wood, etc., generated from various household and industrial activities.
Because of the action of micro-organisms, these wastes are degraded from complex to simpler compounds.
Non-biodegradable wastes consist of inorganic and recyclable materials such as plastic, glass, cans, metals, etc

Dead animals:

With regard to municipal wastes, dead animals are those that die naturally or are accidentally killed on the road.
Note that this category does not include carcasses and animal parts from slaughter-houses, which are regarded as industrial wastes.
Dead animals are divided into two groups – large and small. Among the large animals are horses, cows, goats, sheep, pigs, etc., and among the small ones are dogs, cats, rabbits, rats, etc.
The reason for this differentiation is that large animals require special equipment for lifting and handling when they are removed.
If not collected promptly, dead animals pose a threat to public health since they attract flies and other vermin as they decay. Their presence in public places is particularly offensive from the aesthetic point of view as well.

Construction and demolition wastes:

These are wastes generated as a result of construction, refurbishment, repair and demolition of houses, commercial buildings and other structures.
They consist mainly of earth, stones, concrete, bricks, lumber, roofing and plumbing materials, heating systems and electrical wires and parts of the general municipal waste stream.

Farm wastes:

These wastes result from diverse agricultural activities such as planting, harvesting, production of milk, rearing of animals for slaughter and the operation of feedlots.
In many areas, the disposal of animal waste has become a critical problem, especially from feedlots, Poultry farms and dairies.

Hazardous wastes:

Hazardous wastes are those defined as wastes of industrial, institutional or consumer origin that are potentially dangerous either immediately or over a period of time to human beings and the environment.
This is due to their physical, chemical and biological or radioactive characteristics like ignitability, corrosivity, reactivity and toxicity.
Note that in some cases, the active agents may be liquid or gaseous hazardous wastes.
These are, nevertheless, classified as solid wastes as they are confined in solid containers.
Typical examples of hazardous wastes are empty containers of solvents, paints and pesticides, which are frequently mixed with municipal wastes and become part of the urban waste stream.
Certain hazardous wastes may cause explosions in incinerators and fires at landfill sites. Others such as pathological wastes from hospitals and radioactive wastes also require special handling.
Effective management practices should ensure that hazardous wastes are stored, collected, transported and disposed of separately, preferably after suitable treatment to render them harmless.

Sewage wastes:

The solid by-products of sewage treatment are classified as sewage wastes.
They are mostly organic and derived from the treatment of organic sludge separated from both raw and treated sewages.
The inorganic fraction of raw sewage such as grit and eggshells is separated at the preliminary stage of treatment, as it may entrain putrescible organic matter with pathogens and must be buried without delay.
The bulk of treated, dewatered sludge is useful as a soil conditioner but is invariably uneconomical.
Solid sludge, therefore, enters the stream of municipal wastes, unless special arrangements are made for its disposal.

SOLID WASTE TREATMENT

Current treatment strategies are directed towards reducing the amount of solid waste that needs to be landfilled, as well as recovering and utilizing the materials present in the discarded wastes as a resource to the largest possible extent.
Different methods are used for treatment of solid waste and the choice of proper method depends upon refuse characteristics, land area available and disposal cost they are as follows

Incineration
Compaction
Pyrolysis
Gasification
Composting
Incineration

It is a controlled combustion process for burning solid wastes in presence of excess air (Oxygen) at high temperature of about 1000 Degree Centigrade and above to produce gases and residue containing non-combustible material.
One of the most attractive features of the incineration process is that it can be used to reduce the original volume of combustible MSW by 80– 90%.

Compaction

The waste is compacted or compressed. It also breaks up large or fragile items of waste.
This process is conspicuous in the feed at the back end of many garbage collection vehicles deposit refuse at bottom of slope for best compaction and control of blowing litter.

Pyrolysis

Pyrolysis is defined as thermal degradation of waste in the absence of air to produce char, pyrolysis oil and syngas, e.g. the conversion of wood to charcoal also it is defined as destructive distillation of waste in the absence of oxygen.
External source of heat is employed in this process. Because most organic substances are thermally unstable they can upon heating in an oxygen-free Atmosphere be split through a combination of thermal cracking and condensation reactions into gaseous, liquid and solid fraction

Gasification

Gasification is a process in which partial combustion of MSW is carried out in the presence of oxygen, but in lesser amount than that is required for complete combustion, to generate a combustible gas (fuel gas) rich in carbon monoxide and hydrogen e.g. the conversion of coal into town gas.
When a gasifier is operated at Atmospheric Pressure with air as the oxidant, the end products of the gasification process are a low-energy gas typically containing (by volume) 20% CO, 15% H2, 10% CO2 and 2% CH4.

Composting

Composting is the most responsible technical solution for many developing countries especially, where the climate is arid and the soil is in serious need of organic supplements.
The composting process usually follows 2 basic steps, which may be preceded or followed by pre- or post treatments (crushing, sorting, humidification, mixing with other waste, etc…)

WASTE DISPOSAL

Landfills:- Landfilling is the most simple and economical measure as far as natural decomposition occurs at the disposal site Unscientific and ordinary Landfilling is the common practice for solid waste disposal in many developing countries.
Sanitary Landfills:- Sanitary Landfilling is a process of dumping of MSW in a scientifically designed area spreading waste in thin layers, compacting to the smallest practicable volume and covering with soil on daily basis. The methane (rich biogas) is produced due to anaerobic decomposition of organic matters in solid waste.
Underground injection wells:- waste are injected under pressure into a steel and concrete-encased shafts placed deep in the earth.
Waste piles:- it is accumulations of insoluble solid, non flowing hazard waste. Piles serves as temporary or final disposal
Land treatment:- it is a process by which solid waste, such as sludge from wastes is applied onto or incorporated into the soil surface

Factors affecting the generation rate of solid waste

Factors that influence the quantity of municipal wastes generated include:

Geographic location.
Season of the year.
Collection frequency.
Use of kitchen waste grinders.
Characteristics of populace.
Extent of salvaging and recycling.
Public attitudes.

Typical commercial and industrial unit waste generation rates are:

Office buildings-0.5-1.1 kg/ employee *day
Restaurants- 0.2-0.8 kg/customer*day
Canned and frozen foods-0.04-0.06 tonnes/ tonne of raw product.
Printing and publishing-0.08-0.10 tonnes/ tonne of raw paper
Automotive-0.06-0.8 tonnes/ vehicle produced
Petroleum refining- Tonnes/ employee*day
Rubber 0.01-0.3 tonnes/ tonne of raw rubber.

Solid waste management is the collection, transport, processing, and disposal of solid waste. It is a major issue in many parts of the world, as the amount of waste produced continues to grow.

Waste generation is the process of producing waste. It can be caused by human activities, such as manufacturing and consumption, or by natural processes, such as erosion.

Waste characterization is the process of identifying the types and quantities of waste produced. This information is used to develop waste management plans.

Waste collection is the process of gathering waste from homes, businesses, and other sources. It is usually done by a Local Government or private company.

Waste transfer is the process of moving waste from the collection point to a treatment or disposal facility. This is often done by truck or train.

Waste treatment is the process of converting waste into a less harmful form. This can be done through physical, chemical, or biological processes.

Waste disposal is the process of getting rid of waste. This can be done by landfilling, incineration, or recycling.

Waste reduction is the process of preventing waste from being produced in the first place. This can be done by changing the way we produce and consume goods.

Waste recycling is the process of converting waste into new products. This helps to reduce the amount of waste that goes to landfills and incinerators.

Waste composting is the process of converting organic waste into compost, which can be used as a soil amendment.

Waste incineration is the process of burning waste at high temperatures to reduce its volume and produce energy.

Waste energy recovery is the process of using waste to generate electricity or heat.

Waste landfilling is the process of burying waste in a landfill. This is the most common method of waste disposal in the United States.

Waste management planning is the process of developing long-term strategies for managing solid waste. This includes identifying waste sources, developing treatment and disposal Options, and setting goals for waste reduction and recycling.

Waste management policy is the set of laws and regulations that govern solid waste management. This includes federal, state, and local laws.

Waste management legislation is the process of creating and enforcing waste management laws. This is done by the legislative branch of government.

Waste management technology is the equipment and methods used to manage solid waste. This includes collection vehicles, treatment facilities, and disposal sites.

Waste management economics is the study of the costs and benefits of solid waste management. This includes the cost of collecting, treating, and disposing of waste, as well as the benefits of waste reduction and recycling.

Waste management social impacts are the effects of solid waste management on Society. This includes the impact on public health, the environment, and the economy.

Waste management environmental impacts are the effects of solid waste management on the environment. This includes the impact on air quality, water quality, and land use.

Waste management health impacts are the effects of solid waste management on human health. This includes the risk of exposure to hazardous materials and the risk of infectious diseases.

Waste management occupational safety and health is the prevention of injuries and illnesses among workers in the solid waste management industry.

Waste management Education and training is the process of teaching people about solid waste management. This includes teaching people how to reduce, reuse, and recycle, as well as how to properly dispose of waste.

Waste management research and development is the process of developing new technologies and methods for managing solid waste. This includes developing new ways to reduce, reuse, and recycle waste, as well as developing new treatment and disposal technologies.

Waste management public awareness is the process of educating the public about solid waste management. This includes teaching people about the importance of waste reduction and recycling, as well as the risks of improper waste disposal.

Waste management advocacy is the process of promoting the interests of the solid waste management industry. This includes lobbying for government support and educating the public about the importance of solid waste management.

Waste management international cooperation is the process of working with other countries to manage solid waste. This includes sharing information and technology, as well as developing joint projects.

Waste management sustainability is the practice of managing solid waste in a way that meets the needs of the present without compromising the ability of future generations to meet their own needs. This includes reducing the amount of waste produced, reusing and recycling waste, and properly disposing of waste.

Solid waste management is a complex issue with many challenges. However, it is an important issue that must be addressed in order to protect the environment and public health.

What is solid waste management?

Solid waste management is the collection, processing, and disposal of solid waste. It is a complex issue that involves a variety of stakeholders, including government agencies, businesses, and individuals.

What are the different types of solid waste?

Solid waste can be classified into three main categories: municipal solid waste (MSW), industrial solid waste (ISW), and hazardous waste. MSW is the waste generated by households and businesses. ISW is the waste generated by industrial and commercial activities. Hazardous waste is the waste that poses a threat to human health or the environment.

What are the different methods of solid waste management?

There are a variety of methods of solid waste management, including:

Collection: Solid waste is collected from homes and businesses and transported to a disposal site.
Processing: Solid waste is processed to reduce its volume or to recover valuable materials.
Disposal: Solid waste is disposed of in a landfill or incinerator.

What are the challenges of solid waste management?

The challenges of solid waste management include:

The increasing amount of solid waste: The amount of solid waste generated is increasing every year. This is due to population Growth, Economic Development, and changes in lifestyle.
The limited availability of landfill space: Landfills are a finite resource. Once a landfill is full, it must be closed.
The environmental impact of solid waste management: Solid waste management can have a negative impact on the environment. Landfills can release methane, a greenhouse gas, into the atmosphere. Incinerators can release air pollutants into the atmosphere.
The cost of solid waste management: Solid waste management is a costly endeavor. The cost of collection, processing, and disposal of solid waste can be a significant burden on local governments.

What are the solutions to the challenges of solid waste management?

There are a number of solutions to the challenges of solid waste management, including:

Recycling: Recycling is the process of converting waste materials into new materials and objects. Recycling can help to reduce the amount of waste that is sent to landfills and incinerators.
Composting: Composting is the process of converting organic waste into a soil amendment. Composting can help to reduce the amount of waste that is sent to landfills and incinerators.
Waste reduction: Waste reduction is the process of reducing the amount of waste that is generated. Waste reduction can be achieved through a variety of methods, such as:
- Conserving Resources: Conserving resources, such as water and energy, can help to reduce the amount of waste that is generated.
- Using reusable products: Using reusable products, such as cloth bags and water bottles, can help to reduce the amount of waste that is generated.
- Repairing products: Repairing products, rather than replacing them, can help to reduce the amount of waste that is generated.

What is the future of solid waste management?

The future of solid waste management is uncertain. The challenges of solid waste management are complex and there are no easy solutions. However, it is important to find ways to manage solid waste in a sustainable manner.

What is the most common type of solid waste?
(A) Paper
(B) Plastic
(C) Metal
(D) Food
What is the best way to reduce solid waste?
(A) Recycle
(B) Compost
(C) Reduce
(D) All of the above
What is the most common way to dispose of solid waste?
(A) Landfill
(B) Incineration
(C) Recycling
(D) Composting
What are the three R’s of solid waste management?
(A) Reduce, reuse, recycle
(B) Reduce, reuse, recover
(C) Reduce, reuse, rot
(D) Reduce, reuse, refuse
What is the difference between biodegradable and non-biodegradable waste?
(A) Biodegradable waste can be broken down by bacteria, while non-biodegradable waste cannot.
(B) Biodegradable waste is made from natural materials, while non-biodegradable waste is made from synthetic materials.
(C) Biodegradable waste is less harmful to the environment than non-biodegradable waste.
(D) All of the above.
What are some of the negative impacts of solid waste on the environment?
(A) Air Pollution
(B) Water pollution
(C) Land pollution
(D) All of the above.
What are some of the ways to reduce the amount of solid waste we produce?
(A) Recycle
(B) Compost
(C) Reduce
(D) All of the above.
What are some of the ways to manage solid waste that is already produced?
(A) Landfill
(B) Incineration
(C) Recycling
(D) Composting
What are some of the benefits of recycling?
(A) It reduces the amount of waste that goes to landfills.
(B) It conserves Natural Resources.
(C) It reduces pollution.
(D) All of the above.
What are some of the benefits of composting?
(A) It reduces the amount of waste that goes to landfills.
(B) It produces a valuable soil amendment.
(C) It reduces greenhouse gas emissions.
(D) All of the above.
What are some of the challenges of solid waste management?
(A) The cost of collection and disposal
(B) The lack of public awareness
(C) The lack of Infrastructure-2/”>INFRASTRUCTURE
(D) All of the above.
What are some of the future trends in solid waste management?
(A) Increased emphasis on recycling and composting
(B) Increased use of waste-to-energy technologies
(C) Increased public awareness of the issue
(D) All of the above.