[amp_mcq option1=”Yoke” option2=”Commutator” option3=”generator, the iron losses mainly take place in A. Yoke B. Commutator C. Armature conductors” option4=”Armature rotor” correct=”option1″]<\/p>\n
The correct answer is A. Yoke.<\/p>\n
The yoke is the part of the generator that provides a magnetic path for the flux. The flux is created by the current flowing through the armature windings. The yoke is made of a ferromagnetic material, such as iron, which has a high permeability. This means that it can easily be magnetized. The flux lines from the armature windings pass through the yoke and create a magnetic field. This magnetic field then interacts with the armature conductors to produce a current.<\/p>\n
The iron losses in a DC generator are due to hysteresis and eddy currents. Hysteresis losses occur when the magnetic field in the yoke changes. The magnetic domains in the yoke try to align with the changing magnetic field. This alignment process causes energy to be lost in the form of heat. Eddy current losses occur when the current in the armature conductors causes a magnetic field. This magnetic field induces currents in the yoke. These induced currents flow in closed loops and cause energy to be lost in the form of heat.<\/p>\n
The iron losses in a DC generator are a significant source of power loss. They can be reduced by using a material with a higher permeability, such as silicon steel. The iron losses can also be reduced by using a laminated yoke. A laminated yoke is made up of thin sheets of steel that are insulated from each other. This insulation prevents the eddy currents from flowing and reduces the eddy current losses.<\/p>\n
The other options are incorrect because they are not parts of the generator that provide a magnetic path for the flux. The commutator is a device that reverses the current in the armature conductors as they pass under the brushes. The armature conductors are the coils of wire that carry the current. The armature rotor is the rotating part of the generator.<\/p>\n","protected":false},"excerpt":{"rendered":"
[amp_mcq option1=”Yoke” option2=”Commutator” option3=”generator, the iron losses mainly take place in A. Yoke B. Commutator C. Armature conductors” option4=”Armature rotor” correct=”option1″]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[743],"tags":[],"class_list":["post-46322","post","type-post","status-publish","format-standard","hentry","category-d-c-motors","no-featured-image-padding"],"yoast_head":"\n