[amp_mcq option1=”cable sequence” option2=”jumpers on the hard drive” option3=”drivers that need to be loaded” option4=”hard drive manufacturer web site information E. None of the above” correct=”option1″]<\/p>\n
The correct answer is A. cable sequence.<\/p>\n
When you install a new IDE hard drive, you need to make sure that the cable sequence is correct. The cable sequence is the order in which the hard drive is connected to the motherboard. The correct cable sequence is usually printed on the hard drive itself. If the cable sequence is incorrect, the system BIOS will not recognize the new drive.<\/p>\n
To check the cable sequence, you need to open the case of your computer and look at the hard drive cables. The hard drive cables are usually located near the front of the case. The cable sequence is usually printed on a sticker on the hard drive itself.<\/p>\n
If the cable sequence is incorrect, you need to change the cable sequence. To change the cable sequence, you need to disconnect the hard drive cables from the motherboard and then reconnect them in the correct order.<\/p>\n
Once you have changed the cable sequence, you need to restart your computer. After your computer has restarted, the system BIOS should recognize the new hard drive.<\/p>\n
Here is a brief explanation of each option:<\/p>\n
[amp_mcq option1=”cable sequence” option2=”jumpers on the hard drive” option3=”drivers that need to be loaded” option4=”hard drive manufacturer web site information E. None of the above” correct=”option1″]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[216],"tags":[],"class_list":["post-16581","post","type-post","status-publish","format-standard","hentry","category-computer-hardware","no-featured-image-padding"],"yoast_head":"\n